Contact us: 0274 552 305
Email: sales@advancedgpsag.co.nz

Water Conservation

Conserve Precious Resources and Boost your Bottom Line

Through careful grading or landforming design, you can increase efficiency and yields while conserving both topsoil and water.

GNSS LANDFORMING - COMPLETE DESIGN AND LANDFORMIMG SOLUTION

The Topcon GNSS solution allows the operator to survey, create cut/fill maps and start grading without ever leaving the cab. GNSS (GPS + GLONASS) satellite reception standard provides maximum accuracy, with either single or dual scraper control. Grade more than 12,000 acres in a single setup, and work 24/7, even in dusty conditions.

Use variable slopes to reduce volumes moved
AGForm-3D state-of-the-art survey and design software includes the Topcon Variable Slope PWCS field design module that has revolutionized land leveling by significantly reducing the volume of material moved, and by keeping design surfaces closer to the original terrain.

You get complete control with the ability to survey, design and create plots and reports in a single program, with no per-acre fees or extra charges.

Easy to Get Started

Drive the field to create a topo survey. Simply driving the entire field with your equipped vehicle with elevation mapping turned on will generate a map that can be imported into AgForm-3D.
Use AgForm-3D to generate variable slope cut/fill map. Algorithms in the software generate best-fit cut/fill maps that achieve management goals while moving the minimum amount of soil.
Import Cut/Fill Map to Console and Begin. AGForm-3D offers complete control with the ability to survey, design and create plots and reports in a single program. With no pre-acre fees, it's a one-time investment that generates rewards immediately.

GNSS LANDFORMING WITH AUTOSTEERING

The best of both worlds in a single solution. World's best Autosteering. World's best Landleveling.

Use Variable Slope PWCS to Reduce Volumes Moved
AGForm-3D state-of-the-art survey and design software includes the Topcon Variable Slope PWCS field design module which has revolutionized land leveling by significantly reducing the volume of material moved and by keeping design surfaces closer to the original terrain.

You get complete control with the ability to survey, design and create plots and reports in a single program, with no per-acre fees or extra charges.

Autosteering adds efficiency and stress relief
Operator fatigue can cut short the work day and degrade performance, but autosteering drastically reduces fatigue, extending the work day, and improving results and efficiency. Now, every pass is maximized, fewer passes are necessary, and no multiple passes over the same area are necessary due to gap and overlap. Combined with elevation control of single or dual bucket(s), this is the very best performance available today.

LASER LAND LEVELING

Select single or dual scraper control, and options from basic manual indication to fully automatic machine control. Set very fine increments of either single or dual slopes at the laser transmitter, and the control system has accurate reference anywhere on your field. And if you need to reset your laser, Topcon provides the best repeatability on the market.

Use less water, get better results

A properly leveled (or slightly sloped) field promotes even and efficient irrigation. You use less water, the crop grows better and more evenly, and your soil is retained. The Topcon land leveling solution provides a survey function that measures, then averages elevations so you can more easily achieve proper leveling, or even maintain roads and ditch pads as well.

Durability, visibility, repeatability

Topcon laser land leveling solutions have been at work for decades, and that experience results in a rugged dependable solution delivering great accuracy repeatably, year in, year out. Each component of the solution is optimized with the features that matter and are easy to use. All displays, from the transmitter to the receiver to the control box are bright and easily readable in bright sunlight, with indicators that make sense.

Water Conversion Products

RL-200 - SLOPE LASERS

Slope lasers are perhaps the most advanced of all rotating lasers. They are used over long working distances, and bring the same accuracy everywhere with extremely exacting slopes.

The RL-200 gives you a tool to set the desired cross slope and elevation values for improved productivity.

Wide grade range (up to 25 % slope)
Up to 100 hours battery life
Increased working diameter - 1100 m
Clear graphical display
Environment rating IPX6

TDC - TILLAGE DEPTH CONTROL

Tillage is a foundational practice in agriculture to prepare soil through mechanical agitation. Due to varying conditions, implements can be inconsistent. That’s where precision tillage comes into play, providing an improved seedbed to enable better germination, more precise application of pre-emergence weed control, and easier management of desired surface residue. Tillage depth control ensures consistent and repeatable execution, preparing soil according to plan.

Consistent and repeatable tillage depth control
Improve operational efficiency, reducing input costs
Easy-to-install, setup and use keeping stress to a minimum
ISO-UT compatibility for display flexibility

AES-35 UNIVERSAL AUTOSTEERING

Building upon the time- and field-proven AES-25, the AES-35 Accurate Electric Steering System takes retrofit autosteering to the next level. Offering basic steering to those striving for high-accuracy results, and full compatibility with the Topcon AGI-4 and X Family of Consoles.

Now weatherproof and fully capable in open-cab environments, coupled with a low-profile OEM design and boosted high peak torque motor, the AES-35 offers hydraulic performance in a universal, electric package. It’s compatible with virtually any agricultural machine on the market, including tractors, sprayers, spreaders, swathers, and combines.

Complete GNSS Landforming Survey and Design software

It is no mystery drainage has one of the greatest impacts on yield. AGForm-3D optimizes drainage while moving the least soil possible, reducing inputs and retaining maximum fertility. It sets a proper foundation for all other precision technology to thrive.

AGForm-3D is an easy and intuitive solution for improving surface drainage and irrigation efficiency. It offers state-of-the-art surveying (coupled with a Topcon mobile base, such as the HiPer V or GR-5) and design in a single program, producing single, dual or variable-slope patterns to ensure optimal drainage.

Designs are directly imported to guide your Topcon GNSS landforming solution mounted in a single or dual scraper configuration. AGForm-3D enables independence and with no per-acre fees, it’s an investment that generates value immediately.

Features include: